Posts

Mordheim Board - Garden of Morr Pt V

Image
One of the best parts of terrain building is the priming stage - all the different materials used finally take on a cohesive look.  Originally, I'd given the graveyard a heavy white zenithal, but I immediately regretted this. It was too bright, and I'd much rather gradually build up my colours like I did on the docks.  This time I gave everything a solid spray of matt black, and then spritzed some brown, green and dark grey to get some variation. This is followed by an initial drybrush with khaki to pick out some of the stone detail, and provide a lighter base to tint with washes in the next step. An initial black prime was followed up with a few light sprays of dark brown, dark grey and green.  An initial drybrush with khaki is then applied. I mix up very diluted mix of dark green and burnt umber craft paints and give the entire board a liberal coat (similar to my Docks Board ).  I repeat this with a burn umber and burnt ochre mix for the streets and paths.  It...

Mordheim Board - Garden of Morr Pt IV

Image
A quick update on the Garden of Morr.  All the paving has now been completed, and I've done a first pass with a grout and sand mix (similar to my Docks Board ).  My paving is not as tight as it was on the docks board (I was rushing), so there are sizable gaps.  This means I'll definitely have to do a second pass of grout - something I didn't need to do on my prior board. I'm hoping it'll still look decent once finished.  Hopefully I can prime this up next weekend!! It's all coming together nicely - almost ready for a prime. Here is the board with all the paving complete, but prior to grouting.  Ignore the blue trees -they're removable scatter terrain. I try and build up some grime and dirt in the 'gutters' of the roadway. A lot of big gaps in the paving, but hopefully the grout will hide them. I can also put grass tufts and flock to hide it if necessary.

Mordheim Board - Garden of Morr Pt III

Image
The slow process of paving the Garden or Morr board continues.  With most of the paved areas on my boards, I want consistent height so that there are no issues with how terrain pieces and buildings sit on them.  But for the streets, I've played around with techniques to get a bit more variety in heights and texture. I thought I might provide some more details around how I do this, as I've glossed over it in the past.  It's very quick and easy and looks decent.  Gradually making some progress on the paving.  It's roughly a quarter done so far. The primary materials are cork sheets and card, each of varying thickness. At miniature scale even tiny variations create a really varied and interesting finish. I've used two cork products: one comes on a large roll and is backed with adhesive (you can see the peel away component in the photo on the right), and the other is slightly thicker and comes in sheets.  They have a slightly different texture too. For card, I ...

Starting a Warhammer Fantasy Army

I've been a huge fan of Moshartz ever since he started Der Gaukler Mordheim fanzine.  Fortuitously, supporting him on Patreon meant I have also been receiving cool miniatures for Mordheim every couple of months.  He has produced some really characterful dreg sculpts which capture the look of the original dregs perfectly, but there are also some great zombies and a necromancer model too.  This inspired me to start working an Undead warband.  I got the Cursed City box as a cheap way to acquire a horde of skeletons and zombies and also picked up some ghouls and dire wolves.  Before long, I not only had enough miniatures for a warband, but the start of a small undead army.  With The Old World making a return at around the same time, I thought I'd pull the trigger and build a full army - something I've never actually done before.  While Vampire Counts are not officially part of The Old World, there is a Legacy Army List available, so I grabbed the pdf and ...

Mordheim Board - Garden of Morr Pt II (and Trees!!)

Image
First post in a long while.  I'm still alive and well - just more time poor than usual.  It's very heartening to see there have been over 4,000 views of the blog!! I hope people are finding it inspiring and/or instructional! Unfortunately, the durability of my last build, the Garden of Morr, has left a lot to be desired.  The fences and stonework around the edges were prone to breaking or coming off the poster frame with any form of handling.  That has meant I needed to mount it on something a little more sturdy to ensure it can handle gaming (and storage) a little better. The board is much easier to handle now that it is mounted on a larger canvas.  It is the same dimensions as my docks board, so the two will be able to be joined together for bigger games. You can see I've made a start on the paving process. I've got my hands of a 3' x 4' canvas frame that will align perfectly with my Mordheim Docks board, and my plan is to add roadways and paving in a similar...

Mordheim Board - Garden of Morr

Image
With the Christmas holidays comes time to devote to hobby projects - both new and old.  One project I've been wanting to tick off for a while is a Garden of Morr / Graveyard.  Here is my progress so far. Finished graveyard board at the zenithal stage. I bought a couple of the new GW mausoleum kits during the year, along with a heap of Renedra plastic fence kits and a couple of sprues of gravestones.  I also had a 2' x 3' picture frame, which was the perfect size for a graveyard at scale, which I had bought to get clear plastic sheeting for the resin dam on the docks board. Along with some foam, cork sheets and 3D printed trees, I had all the materials I needed. The first step was to plan a layout.  I knew I wanted: - a raised area in one corner sloping down to the graveyard - at least one mausoleum built into the hillside - a graveyard keeper's / Priest of Morr's cottage complete with tools and unused coffins and gravestones - a couple of low hills; and - a low wall...

Mordheim Board - Docks Pt VII

Image
How the time flies - I can't believe 7 months has passed since my last update!!   I've finally been able to take some time off work to really dedicate to getting this table 100% complete.   The paint and Mod Podge are still drying, but I'm calling this finished! Since my last post, I've given the board a liberal treatment with Dirty Down Moss effect, with a focus on the area immediately around the docks.  I've also added a few autumn leaves here and there for a little pop of contrasting colour.  I then gave everything a quick spray of matt varnish, before moving on to the resin pour. I don't have a lot of experience with resin, and the thought of ruining all my work definitely played on my mind in the lead up to the pour.  I sourced a cheap poster frame with a sheet of clear perspex I could use for my damn walls.  Using silicone and masking tape I tried to ensure this was as 'leak proof' as possible.  I sourced some two-part epoxy resin from ...

Mordheim Board - Docks Pt VI

Image
This project is nearing completion!  I wanted to post on how I've approached painting, because it's a big departure from how I've painted terrain in the past.  Previously, all my stonework has been the stereotypical grey. Occasionally I'd paint some individual bricks different colours but then they would all get a unifying grey dry brush and a black wash.  For this project, I want my Mordheim to have a sickly green tinge, so I set myself a goal of not using any grey paint (besides the zenithal) and focusing on using browns and greens with plenty of varied undertones.  I am very pleased with how it is turning out! Step 1: Prime and zenithal During a brief respite from the humidity and rain over Christmas, I managed to load the board and buildings into the car and duck around the corner to the park.  I live in an apartment and priming in front of the building, even with a drop sheet, can create issues with the neighbors.  I gave the entire board a blast of Ru...

Mordheim Terrain - More Buildings!!!

Image
  Even with a 3x3 foot board, I still want a heap of buildings. The docks need to be densely packed, with buildings separated by narrow alleys.  This post is a dump of all the remaining buildings I've put together. Pegasus kit derivatives: With the two temples built, I still have heaps of the Pegasus gothic building terrain left.  I've put them to good use in the following buildings. Here, I've used the wall pieces to create ruined bottom story, and then added foamcore/coffee stir stick upper levels.  I tried out plastic tennis rackets for the windows and am pretty happy with how they turned out.  I also added heaps of rubble using cork bricks. Using 2 corner pieces, plus a broken pillar I was able to create a heavily ruined building.  I've added heaps of rubble, sand and grout. More of the same, but this time I included an intact wall too. Recycling old buildings: I have a couple of buildings from a few years ago which I am keen to use for the new board to...